Skip to content

BSW & Firmware - Specialist (SW&S)

India Nippon Electricals LimitedHosurOn-Site

Estimated salary, not published by the employer: Est. ₹5.5–8.5 LPA

Needs a free Superjobs account. You'll finish on India Nippon Electricals Limited's site.

Skill score

Summary

The specialist configures, integrates and debugs AUTOSAR Classic basic software stacks, communication stacks, and low-level firmware drivers for automotive ECUs. This suits an embedded engineer comfortable tracing faults from application code down through the microcontroller and hardware.

Estimated salary
Est. ₹5.5–8.5 LPA
Estimated for a mid-level role, ~3 yrs experience (typical for the level), India. Not published by the employer.
Work mode and location
On-Site, Hosur

Job description

Roles and responsibilities

AUTOSAR BSW

  • Configure, integrate and debug AUTOSAR Classic BSW stacks

Hands-on configuration and debugging of

  • CAN / CAN FD
  • LIN
  • Ethernet where applicable
  • CANIf, CanTp
  • PduR
  • Com
  • ComM
  • Nm / CanNm
  • DCM
  • DEM

Diagnostics

Memory & NVM

Firmware & Device Drivers

Develop, configure and debug low-level drivers such as

  • GPIO
  • ADC
  • PWM
  • ICU
  • GPT / timers
  • SPI
  • I2C
  • UART
  • CAN / LIN
  • Watchdog
  • DMA
  • Interrupts

MCU & Low-Level Software

  • MCU start-up and initialisation
  • Clock configuration
  • Reset handling
  • Interrupt configuration
  • Memory mapping
  • Linker/scatter files
  • Flash and RAM partitioning
  • Startup files
  • Compiler/linker configuration
  • Register-level debugging

Configuration & Integration

  • ECU Extract / ARXML handling
  • DBC and communication configuration
  • Diagnostic configuration
  • BSW module configuration
  • Configuration generation
  • Integration of generated and hand-written software
  • Build and integration issue resolution

Debugging & Problem Solving

Must be capable of debugging issues across

Application → RTE → BSW → MCAL → Driver → MCU → Hardware

Should be comfortable debugging

  • CAN/LIN communication issues
  • Diagnostic failures
  • Timing issues
  • Interrupt problems
  • Stack/heap and memory issues
  • Watchdog resets
  • Hard faults / exceptions
  • Flash/NvM corruption
  • Driver and peripheral issues
  • Integration/build/linker problems

Skills required

Top skills

  • AUTOSAR Classic BSW
  • MCAL
  • CAN / CAN FD
  • LIN

All skills (8)

  • Communication stack
  • UDS diagnostics
  • Low-level device drivers
  • Bootloader development
  • ARXML configuration
  • Linker and scatter files
  • Register-level debugging
  • Ethernet

Qualifications

  • Strong understanding of:
  • MCAL
  • ECU Abstraction Layer
  • Services Layer
  • RTE interaction
  • Complex Device Drivers (CDD)
  • Integration of BSW with application software

Bootloader

Good understanding of

  • ECU bootloaders
  • Flash programming
  • UDS-based flashing
  • Application/bootloader memory partitioning
  • Flash drivers
  • Application validity checks
  • Bootloader-to-application handover

Company info

About India Nippon Electricals Limited

India Nippon Electricals Limited makes automotive components, specializing in electronic ignition systems, fuel injection systems, and EV solutions such as controllers, converters, sensors, and engine control units. Its products are used by vehicle manufacturers (OEMs) for two-wheelers, three-wheelers, portable engines, and commercial vehicles.

More jobs at India Nippon Electricals Limited